Solutions For Authorities (vanha)

Public Safety – Fire – Emergency Services - Police

Our solutions for the Public Safety organizations evolve of products and systems that apply to the mission purpose, make sense, produce efficiency, support the communication culture and in the end – save lives and secure property. Our solutions will stand the test of time, even in the most difficult operation conditions.

Military and Border Guard

Solutions for efficient command and communication for a successful mission. From the network centric systems and remote location connections to nearfield terminals and systems. We are specialized in interoperability and Radio-over-IP solutions. Bandercom is proud to be a system provider and supplier for the Finnish Defence Forces.

High Profile Products and Systems

Solutions for Authorities are based on high profile products and systems, such as:

  • TETRA –terminals, gateways and datamodems.
  • Audio accessories; tactical, overt, covert and special audio interfacing products
  • VHF-UHF radios, systems and accessories
  • HF –transceivers, radios and systems
  • Mission specific requirements (HazMat/CBRN, Atex)
  • Interoperability and interfacing gateway products (e.g. VHF to TETRA).
  • Mobile and Tactical Command
  • Fall Back Networks
  • Satellite Backbone Systems

Maritime

Our Solutions portfolio for the Maritime sector is offered to Authorities and private sector, including engineering companies, shipyards, off shore rigs and Navy, Border Guard and SAR-operation parties.

Integration of maritime sensors to one distributed communication and information system. Bandercom’s Maritime Communication System offers state of the art technology for flexible integration into existing systems or for new to build systems.

The system provides HF, VHF, LMR, Satcom Communications, DSC and NAVTEX, Message handling, Video, Radar, Underwater sensors, GIS and/or Database Interrogation.

Bandercom – with the network of subcontractors and affiliates and partners - can provide a turn-key solution including transmitters, receivers, antennas, other sensors and equipment remote control.

  • On-Board communication systems (UHF, Talk Back, etc)
  • Multiband In-Ship Coverage solutions (UHF, TETRA, WiFi, etc)
  • Coastal Stations and Port Communication systems
  • VTS- Radio System
  • On-Board GSM -terminals
  • GSM –sub-networks and in-ship coverage solutions
  • Dect – and intercom systems
  • VHF/MF/HF –transceivers and systems
  • On-board WiFi

Confined Area Coverage (vanha)

As a contractor Bandercom is specilized in engineering and installing solutions for confined area and in-building coverage of various radio and communication networks. We are packed with experience for any radio frequency from 0.5 MHz to 6 GHz and following core technologies:

  • TETRA
  • DMR and dPMR
  • PMR/LMR
  • GSM/UMTS
  • CDMA/OFDM
  • Wifi / WiMAX
  • 4G/LTE
  • Broadcast FM

While our full scale contracting service portfolio is mainly focused to our customers in Finland and areas geographically close, we offer a vast range of top notch services to our international clientele.

These services include the following specific topics, but is not limited to:

IN-BUILDING COVERAGE SERVICES BY BUSINESS PHASES

PRE-PROPOSAL AND PROPOSAL PHASE

Please, contact our sales for detailed suggestion as how Bandercom can help you to build your network to operate in confined areas such as harsh environment, tunnels, underground areas, parking lots and shopping malls where required. It is often beneficial to team up with a specialist well before choosing your equipment supplier or contractor.

1. Site Survey and Installation Planning Services

First phase: Surveying the project "Site" as a physical structure, evaluation of possibilities. Reporting and documenting. Consultation of RF engineering and Project Management. Predictive RF modeling sketch to outline further analysis requirements, such as signal strength and multipath phenomena.

These Survey, Analyzing and Planning Services are further subcategorized as follows but not limited to:

a) Site RF Analyzing Services

Full and complete RF analysis of the Site, to provide necessary information to meet and negotiate requirements of the Customer / End User.

Site RF Survey is performed by using a test transmitter and signal strength measurement tools (typically 0.1 - 6 GHz). Site's RF characteristics are confirmed so that the predictive and often coarse RF models can be fine-tuned to represent the real world. Further, basic RF spectrum analyzer sweep is performed to identify the presence of other RF sources of potential interference (RFI).

b) Site Assessment and Installation Planning

All proposed base station equipment, repeater and antenna installation locations are photographed and documented relative to physical installation requirements, cable runs, and applicable safety and regulatory requirements. As required, a complete set of detailed installation instructions can be created.

INSTALLATION PHASE

Installation Services

Any and all parts of System installations are provided and further negotiable on case by case basis.

Staffing

Qualified and skilled installation staff to perform site installations of in-building and underground systems (typical installation requirements):

Supervision Service

Supervision of Installations carried on-site during work hours, office and back office tasks, draft and scetch -preparations, feasible ad-hoc training of work force to perform necessary tasks, documentation, Customer and End User consultation, participation and representation in Management meetings (ie. Project meetings, subcontractor meetings, etc).

POST-INSTALLATION PHASE

All deployment services to typical RF repeaters and/or Systems. Qualified and skilled staff to perform typical System deployment of in-building and underground systems.

a) Verification and Commissioning of the System

Typically this service is provided to the Owner/Customer/End User of the System or to the Project Management. However, this service is a valuable asset to the Contractor as well.

Services usually include (but are not limited to)

A site walk-through is performed while measuring RF signal strength, BER and multipath phenomena. Areas that do not meet minimum requirements are called out and overall signal levels are reported as annotations on a site plan. (Extend and scale of detailed reporting to be agreed case-by-case).

b) Network & Services Verification of the System

In addition to Coverage Analysis it is essential to test the whole system and network features. In case of TETRA the try-out and reporting shall contain the tests of TMO group calls, circuit switched calls, SDS, possible data applications etc to the required extend. For other technologies, a similar verification process to client's requirements will be set up.

Event Communication - Communication Planning Services (vanha)

Bandercom takes care of your Event Communication needs.

We are large-scale event specialists with experience in the field of international sporting events, concerts, air shows, large openings and more. We offer you event-communications management well beyond radio rentals. You receive personal attention for a seamless event. Our project leaders take an active role in providing services for your event, becoming part of your team. Further our Event Communication Planning services are described here.

You already have plenty of logistics to handle, let us do the communication part of it. You need security and communications to ensure the success of your event. Our commitment to event success is why we’re the system-design and rental provider for almost all the larger events in Finland and neighboring areas.

We offer our partnership to the event organizers on following fields:

  • VHF and UHF –radio rentals and sales
  • System rentals and sales
  • Command Center Solutions
  • Crisis Communication Solutions

References

Please, inquire for the reference list and study cases. We have delivered our rental fleet of radios and valued services to many different kinds of events in style and size.