ICOM IC-F4002 Portable UHF
Affordable, high performance radio that offers abundant features
Simple operation for instant communication
The IC-F4002 series is so easy to use there's no special training required. The few knobs and buttons are generously sized for easy operation and are designed to provide non-slip, positive action – even while wearing gloves.
Easy to hear in noisy areas
The built-in bridge-tied load (BTL) amplifier offers powerful 800mW* audio output from the large 45mm speaker. The radio delivers loud and intelligible audio even in noisy environments.
• Typical with internal speaker
Longer operating time
A new high efficiency FET of the IC-F4002 series reduces consumption current and provides 20 hours* of operating time with the BP-265, 2000mAh battery pack. Even when used with the BP-264, the radio offers 14 hours* of operating time.
*Tx:Rx:Standby=5:5:90. Power save function ON.
Weather resistant, dust protection, military rugged
While the radio is a compact unit with a height of only 111mm, the radio is tested to dust protection and water resistant equivalent to IP54 and 11 categories of MILSTD- 810 environmental test. In short, the IC-F4002 series is built rugged!
Internal VOX capability for hands-free operation
The radio has the internal VOX capability for hands-free operation. Optional compatible headset with plug adapter cable OPC-2004 can be used with the radio. Also, the VOX gain and VOX delay time are adjustable.
Selective calling, quiet stand-by and more
2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.
The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The Tx channel and talk back functions allow you to make a quick response while scanning.
- DTMF autodial
- CTCSS/DTCS encoder/decoder
- BIIS PTT ID transmission
- MDC PTT ID and emergency
- Low battery alert
- 2-step power save
- PC programmable
- Time out timer
- Talk around function
- Lone worker function
- Enhanced emergency
- 3-color LED
- Surveillance function
Frequency range (Varies according to version): 400MHz–470MHz
Number of memory channels: 16 channels
Channel spacing: (Varies according to version) 12.5kHz/20kHz/25kHz
Type of emission: 16K0F3E/14K0F3E/8K50F3E
RX Stand-by 70mA, Max. audio 330mA (Internal SP)
Dimensions (W×H×D): (Projections are not included)
58×111×31 mm (With BP-264)
58×111×35.5 mm (With BP-265)
330g (With BP-264)
270g (With BP-265)
RF output power (at 7.2V DC): 4W, 2W, 1W (Hi, L2, L1)
0.25μW (≤ 1GHz)
1.0μW (> 1GHz)
Audio harmonic distortion (W/M/N): 1.0%/1.0%/1.5% (typ.)
Residual modulations (W/M/N): 45dB/43dB/40dB (typ.)
Sensitivity at 20dB SINAD: -4dBμV (typ.) emf
Adjacent channel selectivity (W/M/N): 73dB/73dB/65dB (typ.)
Spurious response rejection: 70dB (min.)
Intermodulation rejection: 65dB (min.)
AF output power:(at 5% distortion )
Internal SP (With 12Ω load) 800mW (typ.)
External SP (With 8Ω load) 400mW (typ.)
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
MIL-810 F. Also meets equivalent MIL-STD-810 -C, -D and -E.
Ingress Protection Standard
Dust & Water: IP54 (Dust-protection and water resistant)
All stated specifications are subject to change without notice or obligation.